Kaseya Community

SNMP set does'nt generate alarm

  • I finally got working snmp set. I'm monitoring the state of port 24 on an 3Com 4500 switch.
    In the log file i see the state of the port eighter up or down.
    Now i set the snmp alarm threshold on equal to 1 (down) as i found it on the internet.
    When i pull out the cable i can see in the log that the state of the port is down but there's no alarm generated.
    I have connected the monitor set to the right switch with the option A.
    I also tried it by putting the alarm threshold on 2 but it still does'nt work.
    Do i use wrong values or something?
    I've tried to solve it this afternoon (4 hours or more) but can't get it to work.

    Legacy Forum Name: SNMP set does'nt generate alarm,
    Legacy Posted By Username: mkoers
  • No-OneConfused

    Been busy all morning still nog working.

    Legacy Forum Name: Monitor Sets,
    Legacy Posted By Username: mkoers
  • We are having the same problem, I opened a ticket yesterday, they are investigating it...

    Legacy Forum Name: Monitor Sets,
    Legacy Posted By Username: gabe
  • I also am having a similar problem when trying to get the status on the ifOperStatus OID....

    Legacy Forum Name: Monitor Sets,
    Legacy Posted By Username: cricketts